English 首    页 公司简介 产品中心 新闻中心 销售网络 客户服务 联系我们  
帐 号:
密 码:
忘记密码
重新输入
 
   
  
YFC-Q型潜水式液压阀门测试机

性能特征Performance feature

◎本机型最大特点由液压系统泵站,操作控制台和工作夹紧装置台在用户现场安装连接,将试验工件潜入水池中目测,可上下升降,左右两向夹紧工作台设有90度翻转功能,特别适应气体压力试验。
◎适用于直通法兰式阀门的密封压力和阀体强度压力性能试验。
◎压紧方法采用法兰端面密封,压爪夹紧阀门法兰背面进行工作试验,试验结果没有外力影响。◎系统内配置高,低压水泵供压装置,试验介质循环贮存使用。
◎试压介质为气、水,由用户任意选择。
◎设有试压安全保护装置。
◎可选配智能检测数据管理系统,气压增压装置。◎The biggest characteristic of this model is that the hydraulic system pump station, operating console and working clamp installation table can be installed and connected in users  sites and dived the test workpiece into the pond, can lift up and down, left and right two directions clamp worktables set 90 degree overturn function, especially suitable for gas pressure test.
◎Is suitable for through flange valve sealing pressure and valve body intensity pressure performance test
◎The impact method adopts the flange end face seal, holds and presses the claw clip valve flange reverse side to carry out the working experiment and the test result has no the influence of outside force.◎Equip with the high and low pressure water pump pressure supply device in system, the test medium circulating storage use.
◎Pressure trial medium is water, air and kerosene, arbitrary option by users.
◎Equip with the pressure test safe protective device.
◎You can select the intelligent detection data control system,air pressure boosting device.

[1] [2] [3] [4] [5] [6] [7] [8]  下一页

打印】【关闭
 
 
   
 
   产品大全
   精品推荐
   
 
YFC-T2(工作台移动式)液压阀门测试机
YFC型智能式阀门测试机
YFC-Q型潜水式液压阀门测试机
YFC-H型焊接阀测试机
YFC-D型液压蝶阀测试机
YFC-T型立式液压阀门测试机

版权所有:浙江双优机械有限公司   技术支持    提供
址:浙江省温州瓯北镇瓯北大道820号(浦二大道54号) 电话:86-577-67976168 86-577-67976166
传真:86-577-
67976167  Http://www. 浙ICP备09054701号

  [后台管理登陆]